top of page
Rust, Corrosion, Bring It On!

LINE-X Coatings Product List

XS-100; Standard LINE-X

XS-100, a polyurethane/polyurea blend, is the most widely used formulation.  It exhibits excellent protective benefits along with economy.  It has a textured finish and excellent elongation.  This version is the most widely used because of the wide range of applications and is suitable for 90% of industrial applications.  It remains flexible from -40 degrees to 220 degrees F and can be stretched 91.2% before breaking.  More information here.




Designed to provide non-skid properties and protection against impact and abrasion in service environments such as secondary containment and industrial flooring, XS-130 is ideal where elongation and flexibility are of utmost importance.  



XS-310 is a pure polyurea coating with terrific physical properties perfect for applications where extreme impact and abrasion are of concern. XS-310 is very resistant to moisture and has a long cure time making it perfect for flooring and other surfaces that need a smooth finish where durability is key, but chemical resistance is not top priority.



Like its sister product XS-310, XS-350 is a pure polyurea coating with high performance physical properties perfect for applications beset with chemical damage or extreme impact and abrasion. XS-350 is very insensitive to moisture and thus can be used in high moisture environments such as in the wastewater industry.  XS-350 is an incredibly strong product with a tear strength of 708 ppi (ASTM D624) and a tensile strength of 3,250 psi (ASTM D412).



XS-430 is 100% polyurea, has a long gel time so it self-levels well, has outstanding anti-abrasion properties, and has a 430% elongation factor!



A fast curing 100% polyurea with greater tear strength and more elongation than XS-360.



Any company looking for protection against abrasion and impact, but also needing flame retardant properties should look to XS-152. It has been tested for flame spread and smoke density per ASTM E-84. This product is ideal for the military and mining industries.  XS-152 has a delayed ignition.  It will burn with extensive flame exposure, but will self extinguish when the flames are removed.



XS-252 is accepted  by the Mine, Safety and Health Administration (MSHA) for use in the mining industry for protection against abrasion, corrosion and impact, as well as a non-strength enhancing mine sealant. This revolutionary product, the only one in its category, has exceptional flame retardant properties that are ideal during the event of a fire and can be applied to any type of underground equipment, regardless of shape or size.  XS-252 will not ignite.


LINE-X XS-650 is an award winning 100% pure aliphatic polyurea.  This product will hold it's color without a topcoat and provides outstanding protection due to its high tear and tensile strengths.  This product has been applied to the Discovery Channel's Storm Chaser Dominator vehicles, the West Coast Customs Camaro, and it has been applied at Disney World.


CU-400 is a castable (pour) formulation designed for protection in severe service environments where abrasion and impact are a top priority. This scientifically-engineered, self leveling formulation creates an extremely dense, high tensile and tear strength lining that is durable and tough enough to withstand high-volume, abrasive material flow, as well as considerable impact. CU-400 can be used in molds for any shape or size, and can be seen in a variety of industrial and commercial industries, including concrete, construction, manufacturing, mining and more.



CU-460 is similar to CU-400 but is 100% polyurea which makes it insensitive to water and is even stronger.


SE-500 is scientifically-engineered to provide coating solutions for severe chemical environments. With its highly crossed-link formulation, SE-500 is impervious to a wide variety of commercial and industrial chemicals, including caustic and nitric acids, automotive gasoline, aviation and diesel fuel, kerosene and crude oil.  Varied industry applications include, but are not limited to chemical processing plants, oil /gas containment, plating, precious metal mining, primary/secondary containment and wastewater.


One of the greatest threats from a ballistic attack comes from spalling or explosion of metal fragments. PAXCON-2100 can be sprayed over any surface hard enough to cause a projectile to spall, such as aluminum, ceramic or steel. PAXCON-2100 will encapsulate bullets and other ballistic objects, remaining in-tact, without posing further secondary damage resulting from spalling and fragmentation. Suggested applications include military vehicles, breast plates, equipment, target systems and more!  More information here.


Did you know in a typical bomb blast, the majority of casualties come from building fragmentation? With PAXCON-3350, pieces of walls, equipment and other building debris flying at high speeds will no longer result in extensive injury or death. In fact, recent tests results show that a wall coated with the PAXCON-3350 remained intact up to a detonation equivalent of 1,000 pounds of TNT. Some recent applications include the United States Pentagon, government buildings, military bases and vehicles, and international government facilities worldwide.


Aspart-X is a VOC free polyaspartic aliphatic polyurea (PAP).  Aspart-X is great for garage floors, decks, counter tops, etc.  A variety of colors and add-ins such as color chips or quartz is available.

LINE-X Xtra Generation II

Aliphatic coating to be used in conjunction with other LINE-X coatings.  LINE-X Xtra features include improved appearance, improved resistance to ultraviolet light, more chemical resistant, and more stain resistant.


LINE-X Premium

Aliphatic coating that is UV stable, VOC free, and holds its color and gloss for an extended period.  More information here.

LINE-X Platinum

LINE-X has improved spray-on bedliner protection at the molecular level.  LINE-X Platinum uses a pure polyurea technology that combines strength and flexibility to create a product with superior toughness making it the next generation of spray-on bedliner performance.  Platinum is 300% "tougher" than the standard industry bedliner and is available in fade resistant black or color matching.  If you're reading this, I challenge you to find a tougher bedliner coating!  More information here.


ReNew is a patented process that will renew the finish of an old worn out spray-on bedliner of ANY brand.  The ReNew process includes the use of LINE-X Xtra.  The ReNewed bedliner will look brand new and since it will be fade resistant, the bedliner will remain beautiful for years to come.

LINE-X Ultra

Thin coat, fade resistant coating.  Ultra has a very fine texture and is more durable than a typical powder coat.

bottom of page